Powder

Tungsten oxide is mixed with carbon and processed in special furnaces to form tungsten carbide, the main raw material for all cemented carbides. Tungsten carbide is an extremely hard and brittle material and is used as the main component of carbide. Tungsten carbide is mixed with cobalt, which is essential for the properties of cemented carbide. The more cobalt, the tougher the carbide; the less cobalt, the harder and more wear-resistant it is. The weight ratios of the different components are made with the utmost precision. A batch of 420 kg of raw materials must not vary by more than 20 grams. Mixing is a delicate metallurgical operation and, finally, the mixture is ground into a fine and refined powder in large ball mills. The mixture must be spray-dried to achieve the correct flow properties. After grinding, the powder has a particle size of Ø 0.5-2.0 um.
Suppress

First, the basic shape and size are obtained by pressing with punches and dies in a highly automated CNC-controlled press. After pressing, the blade looks very similar to a real carbide blade, but the hardness is far from reaching the standard. The robot transfers the pressed blade to a disc made of heat-resistant material.
Sintering

To harden the insert, it is heat treated at 1500 degrees Celsius for 15 hours. The molten cobalt is bonded to the tungsten carbide particles by a sintering process. The sintering furnace process does two things: the insert shrinks significantly, which must be accurate to achieve the correct tolerances; and secondly, the powder mixture is transformed into a new material with metallic properties, becoming carbide. The insert is now as hard as it should be, but not yet ready for delivery. Before it goes on to the next stage of production, we carefully check the dimensions of the insert in a coordinate measuring machine.
Grinding

Only by diamond grinding can carbide inserts be given the exact shape they need. The inserts undergo various grinding operations depending on the geometric angles required. Most grinding machines have built-in measurement controls that check and measure the inserts in several stages.
Edge treatment
The cutting edge is treated to obtain the correct shape to achieve maximum wear resistance for the required processing. These inserts can be brushed with special brushes with silicon carbide coating. Whatever the processing method, the final result must be checked. 90%-95% of all inserts have some kind of coating. Make sure that there are no foreign particles on the surface of the insert to prevent such particles from adhering to the coating and affecting the performance of the tool.
Coating

Chemical vapor deposition (CVD) and physical vapor deposition (PVD) are two existing coating methods, and the choice of method depends on the material and processing method. The coating thickness depends on the blade application, and the coating determines the durability and life of the blade. The technical know-how lies in the fact that many very thin coatings, such as titanium carbide, aluminum oxide and titanium nitride, are coated on the surface of cemented carbide, which can greatly increase the service life and durability.
If the CVD method is used for coating, the blade is placed in a furnace, and chlorides and oxides in gaseous form are added together with methane and hydrogen. When the temperature reaches 1000 degrees Celsius, these gases interact with each other and also act on the surface of the cemented carbide, so that the blade obtains a homogeneous coating that is only a few thousandths of a millimeter thick. Some coated blades obtain a golden surface and become more valuable. Their durability is increased by 5 times that of uncoated blades. PVD is sprayed on the blade at 400 degrees Celsius.
Final inspection, labeling and packaging
Finally, we will label the product and prepare it for shipment. We use plastic boxes to pack our products, the plastic filling is shockproof, and they are shipped in cartons.
We can also customize labels and plastic boxes in different colors according to your needs.
