When you first hear about the WNMG, your first instinct is probably to assume that the cost per edge would be reduced. However, this is not the case. He said that the reason for this is because how the WNMG is positioned in its pocket is a somewhat fragile design that permits insert movement while the pocket is machined. Vibration is the direct effect, and this vibration leads to higher wear and a shorter life for the tool. Therefore, in many situations, a CNMG would cut the same number of components over time as a WNMG would. The demand made by shops for inserts capable of cutting various distinct materials is seen as problematic by industry professionals. In many situations, four-edge CNMG inserts can cut just as many pieces as their six-edge WNMG counterparts. That is because both types of inserts have two cutting edges. “The more you utilize the same grade and geometry for various applications, the more compromises you impose. As a result, you start incurring penalties in tool life and chip control, ultimately setting yourself up for failure.” Shops that choose a general-purpose grade and chip breaker also reduce their cycle time, which is counterintuitive for those seeking to optimize their operations. On the other hand, several types of machine shops require their equipment to be adaptable enough to handle various machining circumstances. CONCLUSION Two-sided trigon inserts(+). Double-sided trigon inserts for steel and cast iron. First choice for finishing carbon, alloy, and stainless steel. The medium cutting rate for hard materials. Peninsular protrusion for rough cutting. Slanted cutting face reduces crater wear and clogging. The cutting flute’s sturdy flat-land design and big chip pocket minimize clogs and fractures during chamfering. 1.5-6.0 cut depth, 0.25-0.60 feed rate. Inserts offer many cutting edges, which is a plus. Shops should examine which machines will need an insert. Some machines have horsepower and spindle rpm limits. The most robust, wear-resistant insert substrate isn’t always the greatest. To increase productivity, run as rapidly as feasible without reducing tool life. Six-edged WNMG inserts are better than four-edged ones, argues Andersson. Andersson urges never to separate grade and geometry. Microgeometry and macro geometry fall under “geometry.” A four-edge CNMG can cut as many pieces as a WNMG. Both feature two cutting edges. Additional applications using the same grade and geometry mean more tradeoffs.

Showing 1–20 of 28 results

Turning Inserts

WNMG-CH

Turning Inserts

WNMG-BA

Turning Inserts

WNMG-BN

Turning Inserts

WNMG-BX

Turning Inserts

WNMG-IG

Turning Inserts

WNMG-CG

Turning Inserts

WNMG-CN

Turning Inserts

WNMG-CS

Turning Inserts

WNMG-DN

Turning Inserts

WNMG-DS

Turning Inserts

WNMG-EM

Turning Inserts

WNMG-DF

Turning Inserts

WNMG-DM

Turning Inserts

WNMG -HA Insert

Turning Inserts

WNMG-HG

Turning Inserts

WNMG -NU Insert

Turning Inserts

WNMG-NY

Turning Inserts

WNMG -JH

Turning Inserts

WNMG-S

Turning Inserts

WNMG-SF4


 

Inquiry

    *Full Name

    *Country

    * Email

    Phone

    Message

    Email Us

    You can also email us directly for a quote.
    Our specialized and passionate sales team can response your inquiry in 24 hours at latest.

    en_USEN
    This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.