Turning Chipbreaker Application (particial)
Chipbreaker Description
▲ General Turning Insert
Application | Chipbreaker | Feature/Shape of insert |
|---|---|---|
| Steel Semi-finishing and Roughing | BX  | Suitable for semi-finishing and rough machining in steel. That is our study new chip-breaker, cutting steel with excellent performance. |
| Steel Semi-finishing | BA  | M-level double-sided chipbreaker, negative chamfer design, high edge strength, suitable for semi-finishing occasions with unstable working conditions. |
| Steel Roughing CNMG19&SNMG19 only | BS2  | The preferred chip breaker for lightload roughing, wide margin design, good edge strength, high metal removal rate, good wear resistance and cutting life. |
| Steel Heavy-duty | HAR  | M-level single-sided chipbreaker, negative chamfer design, under the large cutting depth and large feed processing parameters, high edge strength and high metal removal rate can be obtained. |
| Steel / Stainless Steel Finishing | CG  | M-Ievel double-sided chipbreaker, small edge width + double positive rake angle, sharp blade edge, low cutting resistance, special edge inclination design, can obtain high-quality machined surface. |
| Stainless Steel Semi-finishing | CN  | M-level double-sided chipbreaker, double positive rake angle, higher edge strength, widely application for the general processing of stainless steel. |
| Stainless Steel Roughing | CS  | M-Ievel double-sided chipbreaker, variable blade width + variable rake angle design,suitable for semi-finishing and roughing of stainless steel. |
| Cast Iron Semi-finishing | DN  | DN chip-breaker with through breaker, cutting cast iron with excellent performance. Through groove, special cutting edge treatment method can obtain good surface finish, suitable for precision-semi-finishing of cast Iron. |
| High temperature Alloy Semi-finishing | DM  | M-Ievel double-sided chipbreaker.Adopting the double positive rake angle combines the sharpness and strength of the insert; the cutting resistance is small, and the wider chipbreaker ensures enough space for chip deformation,redueing groove wear. |
| General Semi-finishing | HN  | M-level single-sided chipbreaker, suitable for semi-finishing of inner holes and outer eiroles of P, M and K type materials. |
| Finishing | HG  | M-Ievel single-sided chipbreaker, suitable for innerhole and outer circle finishing. |
